NULL
SUPPORT
SETTING THE STANDARD FOR OPERATIONAL
EFFICIENCY IN THE METAL FORMING INDUSTRY.
ADD NEW LIFE, PERFORMANCE, AND ACCURACY TO
YOUR ROLL FORMING LINE OR FOLDING MACHINE.
SOLUTIONS FOR ANY METAL FORMING INDUSTRY.
LEVERAGE OUR EXPERTISE TO IMPROVE
PRODUCTIVITY AND PERFORMANCE.
NEW UPGRADE AVAILABLE:
CLOSE

Get up to 105% Production Increase with our new HyperDrive upgrade.

LEARN MORE

Cleaning Controller Screens

We are often asked how to properly clean the screens of our controllers. The information below applies to the following controllers: Pathfinder 5X00 and 6X00 series, XL200 (all variations), XL100, MP300, and MP465.

There is a lot of confusion or apprehension when it comes to cleaning the screens of our controllers, probably for fear of damaging the LCD screens. The LCD screens on our controls are protected by an overlay of very durable, scratch-resistant material. They will not be damaged by routine cleaning.

Use a clean cloth or paper towel along with an all-purpose household cleaner (Fantastic, Formula 409, etc.) to clean the controller screen.

Do not use isopropyl alcohol. This may dry out the protective material and cause cracking.

Do not use anything between isopropyl alcohol and MEK (or higher). This will cause the protective material to melt.

The keypad overlays on these controllers withstand exposure to the following chemicals, without significant visible change, for more than 24 hours duration under DIN 42 115 Part 2:

  • Ajax/Vim in solution
  • Alkalicarbonate solution *
  • Ammonia (<40%) *
  • Acetic acid (<50%)
  • Ariel powder in solution *
  • Bleach *
  • Castor oil
  • Caustic soda (<40%) *
  • Cutting oil
  • Cyclohexanol
  • Diacetone alcohol
  • Diesel
  • Downey / Lenor *
  • Ethanol
  • Glycerine
  • Glycol
  • Gumption *
  • Hydrochloric acid (<36%)
  • Linseed oil
  • Methanol
  • Nitric acid (<10%)
  • Paraffin oil
  • Persil powder in solution *
  • Petroleum spirit *
  • Phosphoric acid (<30%)
  • Potassium ferricyanide
  • Potassium hydroxide (<30%)
  • Pure Turpentine
  • SBP 60/95 *
  • Sulfuric acid (<10%)
  • White Spirit
  • Windex *
  • Wisk

*Extremely faint glossing of the texture was noted.

The keypad overlays on these controllers are not resistant to the following:

  • Concentrated mineral acids
  • Concentrated caustic solution
  • High pressure steam over 100 degrees Celsius
  • Benzyl alcohol
  • Methylene chloride
  • Dimethylformamide
  • Tetrahydrofuran
Copyright 2023 AMS Controls. All rights reserved.